Publicité
6. When installing the gazebo, you need to ensure that the frame is
locked and that the tent is properly secured with a heavy object.
7. There are 6 wind rope buckles for binding wind ropes and wind
rope nails to fix the tent and increase stability.
8. Foot pads with ground nail holes: ensure that it is firmly fixed on
the ground when in use.
9. Rope and ground stakes add stability.
10. Attach the canopy top cloth and sidewalls to the legs with Velcro
straps. Each wall has hook and loop fasteners or straps with
buckles to fix the wall to the leg making it tight and secure enough.
TIPS:
STORAGE: Before storing the canopy, make sure that the
parts are not wet or damp to prevent mold.
CLEANING: Clean the canopy with mild detergent
and water.
INSTALLATION: Do not open the gazebo roughly. Improper
force may result in damage to the parts or connectors.
MAINTENANCE: When not in use, this product should be
kept closed and stored away to avoid potential damage.
HOW TO SET UP:
It is recommended that two or more people complete the installation
of the pop-up canopy tent.
Follow these instructions and be careful to avoid getting your fingers
caught in any moving parts when opening and closing the frame.
06
1
Pull out the canopy frame:
A. Place the canopy frame in the center of the area that needs shade.
B. With your partner on the other side of the frame, grab both outer
legs and lift the frame slightly off the ground. Then pull the frame
back so that it opens to 3/4 of its full opening size. Finally, place the
frame back on the ground.
NOTE: Do not open the gazebo violently; improper force may
cause damage to the brackets or connectors.
2
Attaching the Pop-up canopy top:
A. Unfold the pop-up gazebo top and place it on top of the pop-up
gazebo frame.
B. Secure the pop-up gazebo top to the corners of the canopy frame
using the hook and loop fasteners.
If the cloth does not seem to fit, you need to adjust the degree of
opening of the tent frame.
07
Publicité
