Publicité
Les langues disponibles
Les langues disponibles
C
Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is
selected before starting the machine, the function selected first will be canceled and the second auxiliary
function selection will remain active. For example, if you want to select Quick Wash after you have selected the
Additional Water, Additional Water will be canceled and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, "Programme and
consumption table")
Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be
cancelled. The frame of the auxiliary function will not be illuminated, only inner area will be illuminated.
• Vorwäsche (Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy,
water, detergent and time.
• Schnell Waschen (Quick Wash)
This function can be used in Cottons and Synthetics programmes. It decreases the washing times
and also the number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine with half of the maximum laundry specified in the programme
table.
• Extra Spülen (Rinse Plus)
This function enables the machine to make another rinsing in addition to the one already made after
the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the
minimal detergent remnants on the laundry can be reduced.
• Night mode
Use to wash the cottons with lesser energy consumption and silently. Spin steps are cancelled for a
silent washing and the cycle ends with the Rinse Hold step. After completion of the programme, run
Spin cycle to spin the laundry.
Time display
Remaining time for the completion of the programme while it is running is displayed as "01:30" in
hours and minutes format.
C
Programme time may differ from the values in the "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary
functions selected and the changes at the mains voltage.
4.3.9 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours. After
pressing End Time button, the programme's estimated ending time is displayed. If the End Time is
adjusted, End Time indicator is illuminated.
In order for the End Time function is activated and the programme is completed at the end of the
specified time, you must press Start / Pause button after adjusting the time.
20 / EN
88
0
C
88:88
1888
88
C
0
88:88
1888
Washing Machine / User's Manual
Publicité
