Publicité
Les langues disponibles
Les langues disponibles
Section
Available accessories
06
3
Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been cancelled before
determination, operation is settled.
Switching the reception mode
If a digital broadcast reception condition gets
poor, this unit automatically switches to the
analog broadcast of the same frequency level.
If this function is set to on, the tuner switches
between digital broadcast and analog broad-
cast automatically. If this function is off, recep-
tion will be conducted within an analog
broadcast.
1
Use MULTI-CONTROL to select
BLENDING in the function menu.
2
Press MULTI-CONTROL to select your fa-
vorite setting.
ON—OFF
Note
If SEEK MODE is set to HD and BLENDING is set
to OFF, the tuner can not receive broadcasts. In
this case, the seek mode or reception mode is
changed automatically as follows:
! When SEEK MODE is set to HD, if you switch
BLENDING from ON to OFF, SEEK MODE is
changed to ALL.
! When BLENDING is set to OFF, if you switch
SEEK MODE from ALL to HD, BLENDING is
changed to ON.
Multi-CD Player
Basic Operations
You can use this unit to control a multi-CD
player, which is sold separately.
! Only functions described in this manual are
supported by 50-disc multi-CD players.
% Select a disc
Push MULTI-CONTROL up or down.
46
En
All manuals and user guides at all-guides.com
% Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
% Select a track
Push MULTI-CONTROL left or right.
Notes
! When multi-CD player completes preparatory
operations, READY is displayed.
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner's
manual.
! If there are no discs in the multi-CD player ma-
gazine, NO DISC is displayed.
Introduction to advanced
operations
You can only use COMP/DBE (compression
and DBE) with a multi-CD player that supports
them.
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the
function.
REPEAT (repeat play)—RANDOM (random
play)—SCAN (scan play)—PAUSE (pause)—
COMP/DBE (compression and DBE)—
ITS PLAY (ITS play)—ITS MEMORY (ITS pro-
gramming)
# If you do not operate functions other than
ITS MEMORY within about 30 seconds, the dis-
play automatically returns to the ordinary display.
Function and operation
REPEAT, RANDOM, SCAN and PAUSE opera-
tions are basically the same as that of the
built-in CD player.
Publicité
