Publicité
Les langues disponibles
Les langues disponibles
Section
Available accessories
06
Switching the Game Alert on or off
Once you made team selections, you need to
turn the Game Alert function on.
! The Game Alert function is on at the default
setting.
1
Use MULTI-CONTROL to select
GAME ALERT in the function menu.
2
Press MULTI-CONTROL to turn the
Game Alert on.
The Game Alert function is now on.
# To turn the Game Alert function off, press
MULTI-CONTROL again.
When the game of the selected team
starts
When a game of the selected team is about to
start (or is currently playing) on a different sta-
tion, GAME ALERT is displayed. Press and
hold MULTI-CONTROL to switch to that sta-
tion, and you can listen to that game.
! If you do not operate the function within
about 10 seconds, the display is automati-
cally returned.
Displaying game information
If games of your selected teams are currently
playing, you can display information of the
games and tune to the broadcast channel.
You can display information of the games
while enjoying the sound from currently tun-
ing station. You can also tune to the broadcast
channel when you wish to.
1
Use MULTI-CONTROL to select
GAME INFO in the function menu.
The game information of your selected team is
displayed.
2
Turn MULTI-CONTROL to select a game.
The game is displayed, followed by more de-
tailed game information.
! Game score will be updated automatically.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
44
En
All manuals and user guides at all-guides.com
3
Press MULTI-CONTROL to switch to that
station to listen to the game.
Notes
! If you have not made any team selections,
NOT SET is displayed.
! When games involving your favorite teams are
not currently playing, NO GAME is displayed.
Displaying the Radio ID
If you select CH 000, the ID code is displayed.
% Push MULTI-CONTROL left or right to
select CH 000.
Note
To select CH 000, set the channel select setting to
MODE CH NUMBER. About the channel select
setting, refer to Selecting the SIRIUS channel se-
lect mode on the previous page.
Using Instant Replay function
Following functions can be operated during
the Instant Replay mode.
! To use this function, Pioneer SIRIUS bus in-
terface (e.g. CD-SB10) is required.
! To use this function, SIRIUS plug-and-play
unit with Instant Replay Function is re-
quired.
! For details, refer to SIRIUS plug-and-play
unit's manuals.
% Performing the Instant Replay mode
When SIRIUS tuner is selected as the source,
press and hold S.Rtrv/SAT.
# In the following conditions, tuner exits from
the Instant Replay mode.
— When BAND/ESC is pressed
— When another source is selected
% Selecting a track
Push MULTI-CONTROL left or right.
Publicité
