Victron energy Compact 12/1200 230V Manuel page 15

5.5.2 Configuration examples
Example 1 is the factory setting (since factory settings are entered by computer, all DIP
switches of a new product are set to 'off', except for DS-2).
DS-1 Panel option
DS-2 Panel option
DS-3 Not used
DS-4 Not used
DS-5 Frequency
DS-6 Search mode
DS-7 Not used
DS-8 Store setting
Example 1: (factory setting)
1 No panel connected
2 No panel connected
5 Frequency: 50 Hz
6 Search mode off
8 store setting: off→ on→ off
Store the settings (DS3-DS7) by changing switch ds-8 from off to on, and then back to off.
The LED's "Inverter" and "eco mode" and "alarm" will flash four times to indicate
acceptance of the settings.
off DS-1 off
on DS-2
DS-3
DS-4
off DS-5
off DS-6 off
DS-7
→ ← → ←
DS-8
Example 2
1
2
5
6
8 store setting: off→ on→ off
13
DS-1
on DS-2
DS-3
DS-4
on DS-5
DS-6
DS-7
DS-8
Example 3
No panel connected 1
No panel connected 2
Frequency: 60 Hz 5
Search mode off 6
8 store setting: off→ on→ off
on
off
on
on
→ ←
Panel connected
Panel connected
Frequency: 60 Hz
Search mode on