Publicité
4
⁷⁄₁₆"
English
Installation – ½"
Requires ½" NPT male nipple recessed ⅜" behind
surface of finished wall.
(1) Wrap the threads on the nipple with Teflon
tape.
(2) Install the mounting piece. Tighten using a
⁷⁄₁₆" Allen wrench (not included).
(3) Seal the wall around the
mounting piece using water-
proof sealant.
Failure to seal the wall may
result in water damage.
(4) Install the spout.
Tighten the screw using a 3 mm Allen wrench.
Publicité
