Publicité
Les langues disponibles
Les langues disponibles
Storm window
1-1/2"min
frame or other
(38 mm)
obstruction.
Fig.10
Installation Instructions
SASH
Board
thickness
as required,
for proper
pitch to rear,
along entire
sill. Fasten
with nails or
screws.
If AC is Blocked by Stor m Window
Add wood as shown in Fig.10, or remove storm
window before air conditioner is installed.
If storm window
fram
e must remain, be sure the
drain holes or slots are not caulked or painted shut.
Accumulated rain water or
allowed to drain out.
Removing AC From Window
Turn AC off, and disconnect power cord.
Remove sash seal from between windows, and
unscrew safety sash lock.
Remove screws installed through frame and frame-
lock.
Close (slide) side panels into frame.
Keeping a firm grip on air conditioner, raise sash
and carefully remove.
Be carefully not to spill any remaining water while
lifting unit from window. Store parts WITH air
conditioner.
16
condensa
tion must be
Publicité
