Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
window
frame
Fig.5
Fig.6
Fig.7
Fig.8
FOAM SEAL
Fig.9
3
Extend the side panels out against the window
frame (Fig.5).
4
Place the frame lock between the frame
extensions and the window sill as shown(Fig.6).
"
Drive 3 / 4 (19mm)or 1 / 2 "(12.7mm) locking screws
through the frame lock and into the sill .
NOTE: To prevent window sill from splitting,drill
1 / 8" (3mm) pilot holes before driving screws.
5
Drive 3/4" (19mm) or 1/2" (12.7mm) locking
screws through frame holes into window sash (Fig.7).
6
To secure lower sash in place, attach right angle
sash lock with 3/4" (19mm) or 1/2" (12.7mm) screw
as shown(Fig.8).
7
Cut window sash seal foam and insert it in the
space between the upper and lower sashes (Fig.9).
15
Publicité
