Model Description; All Models; Model Designation - Hatco IWRM-UT Série Manuel D'installation Et D'utilisation

MODEL DESCRIPTION

All Models

Hatco Maskerade™ Under-Counter Induction Warmers
are designed to be installed underneath a variety of non-
metal, solid material countertops. They are equipped with a
single induction coil underneath a hard plastic surface. A 12"
(305 mm) trivet is included and required for use on the top side
of the countertop. Under-Counter Induction Warmers feature
a remote-mounted control panel, a detachable 79" (2000 mm)
control cable that connects the control panel to the warmer, and
an attached 71" (1800 mm) power cord with plug.
NOTE: Refer to "Pan Specifications" in the OPERATION section
of this manual for details on "induction-ready" pans,
pans not suitable for induction warming, and pan sizes.
Hatco Under-Counter Induction Warmers have several
safeguards built into each unit that ensure protection to the unit
as well as the operators.
• A fan-driven ventilation system ensures that the electronic
circuits in the unit do no overheat. Temperature probes
monitor the electronic circuits and will signal the unit to
shut down if the circuits get too hot.
• Electronic circuitry in the unit detects the presence
of the trivet in the warming zone and monitors the
zone temperature through the trivet. The trivet detects
overheating in the warming zone due to an empty pan and
protects the countertop from damage caused by hot pans.
The unit will not work without a properly positioned trivet.
• Electronic circuitry in the unit detects when a small, ferrous
object (such as a fork, spoon, or ring) is placed on the
trivet, and the unit will not operate.

MODEL DESIGNATION

Induction
Warmer
Under-Counter Mount
I W R M - U T - x x
4
English
Remote
Control
Panel
Model IWRMU-UT-06
Unit Wattage
06 = 600 W
Form No. IWRMUM-0321
Control
Cable