Power Supply; Installing The Video Cable - Abus TVCC12020 Manuel De L'utilisateur

6.2 Power supply

Before starting installation, ensure that the power supply system voltage and the rated voltage of
the camera are identical.
The cameras have a 12 V DC power supply. Ensure correct polarity when connecting them. A plug-
in power supply unit (round plug, 5.5 mm x 2.1 mm) is provided for the connection.

6.3 Installing the video cable

In order to transmit the video signal to a converter, monitor, or recorder, a coaxial cable of type
RG59 with BNC plug (male) must be connected to the "Video OUT" connection. The cable length to
the next device may not exceed 150 meters. To increase the range, you can install suitable signal
repeaters.
(1) Video signal (BNC)
1
(2) Power supply
2
12 V DC (5.5 x 2.1 mm)
19