Publicité
Les langues disponibles
Les langues disponibles
9.2
REPLACE THE BLADE
28
WARNING
Use only approved replacement blades.
WARNING
Wear heavy gloves or wind cloth around the blade when
you touch the blade.
NOTE
1. Stop the machine.
2. Make sure that the blade is fully stopped.
3. Remove the safety key and battery pack.
4. Turn the machine to its side.
5. Use a piece of wood to prevent the movement of the
blade.
6. Remove the mounting screw (25) and spacer (28) with a
wrench or socket.
7. Remove the blade (26) and fan (27).
8. Install the new blade. Make sure that the arrows on the
fan engage the holes in the blade.
9. Put in the spacer and tighten the mounting screw.
Recommended tightening torque: 24-27 ft.lbs. 33-37
N.m.
9.3
STORE THE MACHINE
•
Remove the safety key.
•
Remove the battery pack(s).
•
Clean the machine before storage.
•
Make sure the motor is not hot when you store the
machine.
English
•
Make sure that the machine does not have loose or
damaged parts. If it is necessary, follow these
instructions:
•
•
•
•
Store the machine in a dry area.
•
Make sure that children cannot come near the machine.
9.4
27
26
25
1. Remove the grass catcher.
2. Remove the battery and safety key.
3. Pull through the handle holes to fold away the handles.
4. Lock the handles into position.
5. Stand the machine on end and make sure that the brackets
touch the floor.
13
Replace the damaged parts.
Tighten the bolts.
Speak to a person at an approved service center.
VERTICAL STORAGE
EN
Publicité
