Publicité
Les langues disponibles
Les langues disponibles
Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press
or
selection is highlighted.
3. Press
or
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press
to select CH PROGRAM.
5. Press
or
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH + or – to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press
to display the SETUP menu.
3. Press
or
ERASE.
4. Press
or
ERASE, whichever function you
want to perform.
5. Repeat steps 1–4 for other
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
3N51001A[E] P07-16
16
or
to display the SETUP menu.
until the TV/CABLE
to highlight either
PICTURE AUDIO
TV / CABLE
CH PROGRAM
ADD / ERASE
SELECT
to start channel programming. The TV will automati-
or
PICTURE AUDIO
to highlight ADD/
TV / CABLE
CH PROGRAM
to select ADD or
ADD / ERASE
SELECT
or
on the TV or CH + or – on the remote
POWER
1
CH
4
SETUP
OPTION
TV CABLE
7
START
ADD
VOL
ADJUST
–
EXIT
VOL
RESET CAP/TEXT
DISPLAY
DVD CLEAR
CODE
CH
SETUP
OPTION
CABLE
START
ADD ERASE
ADJUST
16
23/1/04, 4:22 PM
TV
VCR
CABLE
DVD
2
3
+10
5
6
100
Channel
Numbers
8
9
0
CH +
Channel +/–
VOL
MENU/
+
ENTER
Menu
CH –
RECALL
TV/VIDEO
FAV
CH RTN
FAV
Exit
1/2
TOP MENU
DVD MENU
MTS
SLEEP
MUTE
Publicité
