Olympus FE-210 Mode D'emploi page 14

1 Press NY to select [Y] and press H.
2
Press the shutter button completely to take the
picture.
The self-timer lamp lights for approximately 10
seconds after the shutter button is pressed, then
starts blinking. After blinking for approximately 2
seconds, the picture is taken.
Power Save Feature
En
To save battery power, the camera automatically enters sleep mode and stops
operating if not used for approximately 3 minutes. Press the shutter button or
zoom lever to reactivate the camera.
If the camera is not operated for 12 minutes after the camera enters sleep
mode, it automatically retracts the lens and turns off. To resume operation, turn
on the power again.
14
All manuals and user guides at all-guides.com
Self-Timer
Self-Timer Lamp