Publicité
Les langues disponibles
Les langues disponibles
6.3.2 Checking, removing or changing a set
cleaning time or mode
Press the TIMER button on the remote
1
control. The set time and cleaning mode
become visible on the display.
To remove the set cleaning time and cleaning
2
mode, press the TIMER button again. The
set time and cleaning mode disappear from
the display. Then press the ENTER button to
conirm.
To change the cleaning time or mode, repeat
3
the steps in section 'Setting the timer'.
D
Note:
To leave the timer function without removing
the set cleaning time, press the ENTER button.
6.4 Manual driving
Press the direction selector on the remote
1
control to direct your homeRun to a
particular area.
•
If you press the direction selector when the
robot is on but not cleaning, the robot moves
in the desired direction without cleaning.
•
If you press the direction selector when the
robot is cleaning, the robot moves in the
desired direction while cleaning.
D
Note:
The down arrow does not work because your
homeRun cannot move backwards.
6.5 BASE function
Press the BASE button on the remote control
1
to make the homeRun return to its base
station. The text 'bASE' appears on the display.
The robot moves to the base station and
docks itself (see chapter 'Preparing for use').
6.6 TURBO function
Press the TURBO button on the remote
1
control to make your homeRun clean more
thoroughly (1). The TURBO indication lights
up on the display (2).
Press the TURBO button again to return to
2
the robot's normal level of thoroughness.
21
Publicité
