Publicité
Les langues disponibles
Les langues disponibles
Programming The Remote
The Universal Remote Control can be programmed to
operate many manufacturers' components, using the
component function buttons for VCR, DVD, CABLE or
DBS. Follow the procedures for programming your Remote
Control with or without a code for the component.
Device
Operates
TV
TV (Panasonic Only)
DBS/CBL
DBS\CBL (Preset)
VCR
VCR (Preset)
DVD
DVD (Preset)
Note:
Determine the manufacturer of the component and look
in the table for the code (found on page 10).
Procedure
•
Confirm that the external component is plugged in and
operating.
•
Turn the component off.
ACTION
•
Press
and
seconds.
•
Press appropriate component button on the Remote
Control VCR, DVD, CABLE or DBS.
•
Enter the 3-digit component code using the Remote
Control numeric keypad (0 ~ 9 buttons).
•
Press the Remote Control
component. If the procedure was successful, the
component will turnon.
Note:
If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.
Programming Without A Code
This procedure searches all codes and is called the
"sequence method."
•
Confirm that the external component is plugged in
and on.
•
Turn the component off.
ACTION
•
Press
seconds.
•
Press appropriate component button on the
Remote Control.
Press VOL u to move forward to the next code.
•
Press t VOL to move backward.
•
Press the Remote Control
component. If the procedure was successful, the
component will turn on.
Note:
Repeat the above steps until the component code is
found. It may take many attempts before the correct
code is found.
•
After the code is found, press
code.
All manuals and user guides at all-guides.com
Default
Panasonic Code
Panasonic DBS Code
Panasonic Code
Panasonic Code
POWER
together, for at least 5
to test the
POWER
POWER
and
together, for at least 5
to test the
POWER
ACTION
to store the
R
EMOTE
Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.
Write the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.
VCR
CABLE
DBS
C
O
ONTROL
PERATION
DVD
9 l
Publicité
