Publicité
Les langues disponibles
Les langues disponibles
EN
C L E A N I N G
Cleaning the Vacuum Body
1.
Turn the vacuum off.
2.
Wipe the outside of the vacuum down with
a damp cloth.
3.
Allow the vacuum to completely dry before
using.
Warning: Do not allow water to enter the
internal parts or motor of the vacuum.
Cleaning the Dust Bin &
Metal Filter
1.
Make sure the vacuum is off and the dust
bin is completely empty before cleaning
(see
Emptying the Dust Bin
2.
Press the Dust Bin Release Button and
pull the dust bin to remove it. [Figure 3.1]
Empty out any remaining dust and debris,
and remove any hair tangled around the
metal filter.
3.
Remove the pre-motor filters from the top
of the dust bin. Set aside or wash the pre-
motor filters (see
& Post-Motor Filters
4.
Rotate the metal filter counterclockwise to
remove it. [Figure 3.2]
5.
Rinse the dust bin and metal filter with water
and allow them to dry. Make sure the parts
are completely dry before using.
6.
Reattach the metal filter and replace the
pre-motor filters. Attach the dust bin to the
vacuum body.
Warning: Do not allow water to enter the
internal parts or motor of the vacuum.
12
, page 11).
Cleaning the Pre-Motor
, page 13).
Figure 3.1
Figure 3.2
Publicité
