Assigning The Ip Address Using The Setup Program - Sony IPELA SNC-DF70N Manuel D'installation

Assigning the IP Address
Using the Setup Program
1
Insert the supplied CD-ROM
disc into your CD-ROM drive.
2
Click the Setup icon of IP Setup
Program.
The "File Download" dialog opens.
3
Click Open.
Note
If you click "Save this program to disk"
on the "File Download" dialog, you
cannot install correctly. Delete the
downloaded file, and click Setup icon
again.
4
Install the IP Setup Program to
your computer following the
wizard displayed.
If the Software License Agreement is
displayed, read it carefully and accept
the agreement to continue the
installation.
5
Start the IP Setup Program.
The program detects the Network
Camera SNC-DF70N/DF70P connected
on the local network and lists it (them)
on the Network tab window.
6
Click on the SNC-DF70N or
DF70P you want to assign a new
IP address in the list.
The network settings for the selected
SNC-DF70N or DF70P are displayed.
7
Set the IP address.
To obtain the IP address
automatically from a DHCP
server:
Select Obtain an IP address
automatically.
The IP address, Subnet mask and
Default gateway are assigned
automatically.
Assigning the IP Address to this Unit
21
GB