Whirlpool W10423115A Instructions Pour L'installation page 17

5.
Reverse outer window assembly
Handle
Using a Phillips screwdriver, remove the 4 screws from the
outer window retainer and lift off the trim ring off the window
(A). Rotate trim ring 180° and secure with the 4 screws
removed earlier (B).
6.
Rotate and reassemble outer window
assembly to trim ring
Notches
A
With the edge with 2 notches at the top, align the notches
on the outer window assembly with the tabs on the trim ring
and lower into place as shown in figure A. Rotate the outer
window assembly counterclockwise to lock tabs into place
Handle
(figure B). Using a Phillips screwdriver, secure with 2 screws
B
removed earlier.
IMPORTANT: Do not overtighten.
Bottom
of
door
A
B
17