Télécharger Imprimer la page

BIG ASS FANS AirEye Serie Manuel D'installation page 8

Publicité

Les langues disponibles

Les langues disponibles

SPEED AND TIMER CONTROLLER
Note: Secure cord retainer to plug before attaching
controller to motor cable.
Adjust Speed and Timer
To adjust fan speed, press the
the Speed panel.
To adjust timer settings, press the
on the Hours panel.
To set the maximum fan speed, select your preferred
speed, and then press and hold the Speed
buttons simultaneously for three seconds. LED
indicators will blink, indicating new maximum speed.
Cancel, Reset, and Lock Timer
To cancel the timer, press Hours
turn off.
To reset the timer after the programmed time period
has elapsed and the fan is off, press power button. The
timer will restart from the last saved setting.
To lock the timer, press and hold Hours
simultaneously for three seconds. LED indicators will
blink to indicate that timer is locked. Unlock timer by
pressing Hours
and
Factory Reset
To reset controller to its factory settings, press and hold
the Hours and Speed
the controller. The Speed LED indicators will count up
from 1 to 11 when reset is complete.
Note: In the event of a power cycle, the controller will
retain its most recent speed and timer settings.
6
All manuals and user guides at all-guides.com
and
buttons on
and
buttons
button until all LEDs
and
buttons
buttons again.
buttons, and then power cycle
WWW.BIGASSFANS.COM
and
Extension Cord
(optional)
Speed Setting
© 2017 DELTA T LLC
ALL RIGHTS RESERVED.
RPM
1
350
2
445
3
540
4
635
5
730
6
825
7
920
8
1015
9
1110
10
1205
11
1300

Publicité

loading