Cata AS 600 Manuel D'utilisation page 24

NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
5. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
Other cooking zone will keep operating if they are
turned on previously.
6. when using "the timer as an alarm" and "the timer
to swith off the zones " together , the display will
show the remaining time of alarm as first priority.
Press cooking zone to show the remaining time of
switch off timer.
Using your Cooker Hood
1. Touch the ON/OFF key（C）for 3 seconds. After
power on, the buzzer beeps once, all displays
show " - ", indicating that the cooker hood has
entered the state of standby mode.
2.Select the power level by pressing the key (G)
key(F) .
3.The power level will start at 0. Pressing the key (G)
will count up the power levels from 0.1.2.3.4.5 to P in
numerical order.
• If you don't choose a extraction level setting within 1
minute, the cooker hood will automatically switch off.
You will need to start again at step 1.
• You can modify the setting at any time during cooking.
Using the Filter screen change reminder function
At the end of each running cycle, the control panel chip
should record the running time and accumulate it.
When the range hood cumulative working hours working time
of the more than 50 hours of motor, Filter screen change
reminder function is activated, the digital tube display "two
horizontal" (such as machine still continue to work, the"two
horizontal" alternating with gear), the lights light up and
start flashing red continuously, until the user presses the Filter
screen change reminder function key(H)
remind the digital tube stop show "two horizontal "
return to normal, according to the gear mesh remind button
close touch control function at the same time, the control
board chip cumulative timing to zero, and to the cumulative
effect in the next start timing.
Using the Auto mode combination
or
, the screen to
and
Using the Delay shutdown function
1. When the fan motor is on and the Delay shutdown function
button key(I) is pressed the icon will flash and the
display will show the current fan speed , the delay
shutdown function indicator lights up.
The chosen speed level will remain in use for five minutes
2.
before dropping down to the next lowest speed.This
speed will remain in operation for two minutes before
dropping down again. This will be repeated every two
minutes unless the speed is already at level 1 and then
the fan will turn off.
Press the Delay shutdown function button key(I) and hold
3.
for 3 seconds , it will cancel Delay shutdown function .
• In the process of turning on the delayed shutdown mode
and running, if the gear is adjusted by operating the key
(G) or key(F) , the above delay shutdown
process will be reperformed at the final adjustment gear.
1. Under the condition of the whole machine running, click the
key (G) and key(F)
2. After 3 seconds, the display of the Cooker Hood displays
"A" and flashes 5 seconds. After 5 seconds, the display of
the Cooker hood stops flashing. At this point, the Cooker
hood enters AUTO mode, and the working gear of the Cooker
hood is automatically adjusted according to the opening
status of the induction cooker. in automatic mode, the
display maintains the display "A" and no longer displays the
rest of the gears.
speed level of hood
Speed 1
Speed 3
Speed 5
Speed P – Boost
Exit automatic mode combination
In the Cooker Hood of automatic mode, click the key (G)
and key(F) 3 seconds at the same time. then the display
of the Cooker Hood displays "8", flashes 5 seconds,
stops flashing after 5 seconds, the display switches to
display the current working gear of the Cooker Hood, and
the Cooker Hood exits the automatic mode successfully.
3 seconds at the same time.
Power level of Hob
This speed will be selected when
there are no more than two cooking
zones in use, and the combined
output is 8 or less. For example,
zone 1 is on 2, and zone 2 is on 5.
This speed will be selected when
there are no more than three cooking
zones in use, and the combined
output is between 9 and 24. For
example, zone 1 is on 7, zone 2 is on
6 and zone 3 is on Boost (10).
If the power levels of different burners
are more than 24 Or all burners on
with power levels no more than 35.
This speed will be selected when all
four cooking zones are in use, and
the combined output is greater than
35. For example, zone 1 is on 9,
zone 2 is on 9, zone 3 is on 9 and
zone 4 is on Boost (10).