Boost Function - REV MAX Mode D'emploi

If the operating mode is changed on one device
in a room, this change is applied on all radiator
t h e r m o s t a t s a s s i g n e d t o t h a t r o o m .
The boost function makes use of human sensations of heat.
When the function is activated, the heating valve opens
immediately for 5 minutes at 80% (factory setting).
You can feel the heat from the radiator immediately and
at the end of the 5 minutes, the room continues to heat
up. If you arrive home earlier than usual and want to heat
the room up quickly, or you need some extra heat in the
morning after a shower, then the boost function will help
you with this.
• Press the Boost button to activate the boost function.
• The remaining time for the function is counted down in
seconds ("300" to "000"). Whilst the function is active,
• The activity symbol (
adjusting pin opens/closes the valve.
• Once the set time has elapsed, the radiator thermostat
switches back to the mode that was active previously
(automatic/manual), with the temperature that was set
previously.
• The function can be deactivated prematurely at any
time by pressing the Boost button again.
The radiant heat will not have an immediate
effect if the radiator is covered or concealed (e.g.
by a sofa).
26

10. Boost function

is displayed.
) is displayed as long as the