Wireless-G PCI Adapter with RangeBooster
Appendix A: Troubleshooting
This appendix consists of two parts: "Common Problems and Solutions" and "Frequently Asked Questions." This
appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G
PCI Adapter with RangeBooster. Read the description below to solve your problems. If you can't find an answer
here, check the Linksys website at www.linksys.com/international.
Common Problems and Solutions
1. The Wireless-G PCI Adapter with RangeBooster does not work properly.
• Reinsert the Wireless-G PCI Adapter with RangeBooster into your PC's PCI slot.
• Right click on My Computer and select Properties. Select the device manager and click on the Network
Adapter. You will find the Wireless-G PCI Adapter with RangeBooster if it is installed successfully. If you
see the yellow exclamation mark, the resources are conflicting. You will see the status of the Wireless-G
PCI Adapter with RangeBooster. If there is a yellow question mark, please check the following:
• Make sure that your PC has a free IRQ (Interrupt ReQuest, a hardware interrupt on a PC.)
• Make sure that you have inserted the right adapter and installed the proper driver.
If the Wireless-G PCI Adapter with RangeBooster does not function after attempting the above steps, remove
the adapter and do the following:
• Uninstall the driver software from your PC.
• Restart your PC and repeat the hardware and software installation as specified in this User Guide.
2. I cannot communicate with the other computers linked via Ethernet in the Infrastructure
configuration.
• Make sure that the PC to which the Wireless-G PCI Adapter with RangeBooster is associated is powered
on.
• Make sure that your Wireless-G PCI Adapter with RangeBooster is configured on the same channel and
with the same security options as with the other computers in the Infrastructure configuration.
Appendix A: Troubleshooting
Common Problems and Solutions
All manuals and user guides at all-guides.com
31