Publicité
Les langues disponibles
Les langues disponibles
3
Find the best fit for your keyboard and tablet
4
Press the On/Off Switch for 1.5 to 5 seconds. The Power Indicator Light
NOTE: When you first turn on the Keyboard, both the Power Indicator Light and the
Bluetooth Status Indicator Light glow for 5 seconds. You cannot connect the Keyboard to
your Tablet until only the Power Indicator Light glows.
NOTE: The remaining steps in this procedure work for Android tablets. For other tablets,
see the tablet documentation for instructions on Bluetooth pairing.
5
On your tablet Home screen, tap Apps > Settings > Wireless & networks > Bluetooth
settings.
6
Tap Bluetooth to turn Bluetooth on.
7
On the Keyboard, press the Bluetooth Connection Button. The Bluetooth Status
Indicator Light starts blinking for 10 minutes or until connected to a device.
8
On your tablet, tap Find nearby devices.
9
When your Keyboard appears on the tablet screen, tap it.
10 Your tablet screen displays a passkey. Enter the passkey on the Keyboard, and press Enter.
glows.
4
11 Your tablet screen shows the Keyboard as Connected. On the Keyboard, the
Bluetooth Status Indicator Light turns off.
You can now use your Keyboard to type in any app that supports keyboard entry.
Note the following about the Bluetooth connection between the keyboard and your
Tablet:
• Keyboard will go into pairing mode if the On/Off Switch is pressed for 5 seconds or
longer then released (regardless of on or off state).
• Press the On/Off Switch for 1.5 to 5 seconds then release = toggle keyboard power (on
to off, off to on).
• First turn (Factory default, no prior paired BT devices) – enter pairing mode
automatically.
• In ON state only - Hold "CTRL + FN + F" for 3 seconds or longer = reset to factory default
mode (clear all previously paired BT devices in memory), ALL LEDs should flash on and
off 3 times and keyboard should turn to off mode.
• In ON state only – Hold "CTRL + FN + Custom A" for 3 seconds = Android Shortcut Mode.
• In ON state only – Hold "CTRL + FN + Custom B" for 3 seconds = Win7 Shortcut Mode.
• If there is no active key press for 1 minute, the keyboard should go into sleep mode.
• Anytime a key is pressed in sleep mode, the keyboard should automatically connect to
last paired device if present. If device is not found after waking from sleep mode within
30 seconds, the device should go back to sleep.
LED Behavior and Explanation
LED Behavior
Explanation
• If the Keyfolio is off, asleep, or the battery is dead, the LEDs will remain
off.
• Initially at power-up, the Power and Bluetooth LEDs will turn on and stay
lit for 5 seconds.
• After 5 seconds the Bluetooth LED will turn off, followed by the Power
LED 0.5 second later.
• When the Bluetooth Connection Button is pressed, the Power LED will
stay solidly lit, while the Bluetooth LED will begin to blink for 10 minutes
or until connected to a device.
• Blink pattern: ON 1s, OFF 0.5s
• Once the Keyfolio is connected with your tablet, the Power LED will
remain lit and all others will go off.
• Also, if the Keyfolio is awoken from sleep mode, the Power LED will turn
on immediately.
• While the Keyfolio is connected to your tablet, the state of the Caps Lock
toggle is shown by the Caps Lock LED.
• When the Keyfolio is plugged into a power source, the Charge LED will
turn red and turn off only when charge is completed.
5
Publicité
