Publicité
Les langues disponibles
Les langues disponibles
8.
Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
Cleaning
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
Always be sure to dry all parts completely before plugging the device back in.
Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,
dust, dew).
Do not immerse the device in any liquid.
Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
There are no user-serviceable parts, apart from the fuse and the lamp.
Refer to an authorized dealer for service and/or spare parts.
Replacing the fuse
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
3.
Remove the rear cover with an appropriate screwdriver.
4.
Open the fuse holder.
5.
Replace with an identical fuse.
6.
Insert the fuse holder back in its place, replace the rear cover and reconnect power.
9.
Technical Specifications
power supply ......................................................................... 100-240 V~, 50/60 Hz
power consumption ........................................................................................ 22 W
power factor ................................................................................................... 0.51
LEDs in device
derby ......................................................................................... 4 x 3 W RGBW
strobe ............................................................................. 16 x 0.5 W SMD white
laser in device
red ..................................................................................................... 112 mW
green ................................................................................................. 77,5 mW
DMX channel modes
4-channel mode ................ laser control, laser rotation, derby colour, sound control
dimensions .............................................................................. 260 x 235 x 180 mm
weight ......................................................................................................... 1.9 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 05 – 09/02/2018
HQLE10026
9
©Velleman nv
Publicité
