Garland SCAR 302 E Manuel D'instructions page 30

English
9. TROUBLESHOOTING
Depending on the symptons of the machine, we can detect the probable cause of the problem and solve the
problem:
PROBLEM
The engine does not work
Abnormal noises
Abnormal vibrations
In case of not solving the problem, take the machine to your nearest service dealer.
To locate your nearest after sales dealer, contact the shop where you bought the machine from.
CAUSE
The machine is not switched to the
mains
Damaged cable
Switch in a bad state
Worn out brushes
Overload protection activated
Strange object ob the blades
Internal problem of the engine or
transmission
30/100
ACTION
Switch the machine to the mains
Take your machine to the after sales
dealer
Never repair the cable with tape
Take your machine to the after sales
dealer
Take your machine to the after sales
dealer
allow to cool for 15 minutes
Unplug the machine, wait for the
blades to stop and remove the objects
that are blocking the cutting elements.
If the noise persists, take the machine
to your nearest after sales dealer.
Take your machine to the after sales
dealer