Human Touch 2 Serie Manuel D'utilisation Et D'entretien page 3

get ready
UNPACK THE BOXES
Headrest frame
Chair frame
Head sock
Footrest frame
INSTALLING THE FOOTREST FRAME
1. Remove the footrest frame screws.
Using the Phillips-head screwdriver (provided), remove the two
screws from the footrest frame. Retain them for use in step 3.
2. Slide the footrest frame onto the chair frame.
Slide the two ends of the footrest frame into the holes in the
front of the chair frame.
humantouch.com
Body pad Arm cap (2) Phillips-head
screwdriver
Screw (6)
Head pillow
Head pad
2
Your Human Touch Perfect Chair
assembly. Just attach the headrest/footrest frames, pads,
arm caps, and head pillow, and you're done!
3. Replace the footrest frame screws.
Using a Phillips-head screwdriver and the two provided screws,
secure each side of the footrest frame to the chair frame.
4. Attach the canvas to the footrest frame.
Using both hands, gently pull the seat canvas forward just to
the top of the footrest frame, then secure the two flaps located
underneath the canvas to the footrest frame.
5. Finish securing the canvas to the frame.
Using both hands, continue to pull the seat canvas all the way
forward to cover the footrest frame, then secure the two front
and two side flaps, using the hook and loop fasteners.
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame.
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
2. Secure the body pad.
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook and
loop fasteners.
requires some simple
3 3