Publicité
Les langues disponibles
Les langues disponibles
ADJUSTING THE BLADE
When the hedge trimmer is removed from the package, it is folded in its storage
position with the blade against the shaft (Fig. 2). Adjust the blade to a suitable working
position before attaching it to the power head.
2
There are 12 possible working positions
(Fig. 3). The angle of the blade can be
adjusted upwards to any of 5 positions,
from 0 (straight) to 45, and downwards
to any of 7 positions, from 0 to 90 (right
angle facing down).
1. While pressing the release trigger,
rotate the adjusting lever to adjust
the blade to the desired cutting
position (Fig. 4).
2. Once the desired position has been
reached, release the release-trigger.
An audible click indicates that
the locking pin is engaged in the
locking plate (Fig. 4).
WARNING!
injury, remove the battery before making
adjustments and make adjustments only
when the blades are at a standstill. Never
touch the blades while making adjustments.
HEDGE TRIMMER ATTACHMENT — HTA2000/HTA2000-FC/HTA2020/HTA2020-FC
To reduce the risk of
3
45˚
135˚
4
Locking Plate
2
1
Locking Pin
17
Publicité
