4. Precautions
To reduce the risk of electric shock and to ensure that your guarantee
remains valid, do not remove cover (or back).
Avoid rain and humidity. Do not use the camera in damp places. This
camera is designed for indoor use only. If the camera becomes wet, the
power supply must be switched off immediately. The camera should then be
checked by a service technician before being used again.
Never point the camera towards the sun. Never aim the lens at the sun
or other very bright objects (laser light). This can damage the CCD element
and create white dots on the monitor, a sign that CCD pixels are destroyed.
Operate the camera only within the specified temperature, humidity
and power ranges. Operating the camera outside the prescribed ranges
can lead to reduced product life and early malfunction. Greatly exceeding
the specified operating ranges can also result in immediate failure of the
camera. All specifications can be
found in the technical data.
15