3 Installation
3.3. Electrical connection
Connect the product to a grounded outlet
protected by a fuse complying with the values in
the rating plate. Our company shall not be liable
for any damages that will arise when the product
is used without grounding in accordance with the
local regulations.
• Electrical connection must comply with national
regulations.
• Power cable plug must be within easy reach
after installation.
• The voltage and allowed fuse or breaker
protection are specified in the Rating Plate
which is affixed to interior of the product. If
the current value of the fuse or breaker in the
house does not comply with the value in the
rating plate, have a qualified electrician install a
suitable fuse.
• The specified voltage must be equal to your
mains voltage.
• Do not make connections via extension cables
or multi-plugs.
WARNING:
B
must be replaced by the Authorized
Service Agent.
WARNING:
B
it should not be operated unless it is
repaired by the Authorised Service
Agent! There is the risk of electric
shock!
3.4. Adjusting the feet
If the product stands unbalanced after installation
adjust the feet. Taking help from someone to
slightly lift the product will facilitate this process.
WARNING:
B.
Product must not be plugged in when
adjusting the feet. There is the risk of
electric shock!
Turn the front feet to balance the product. The
corner where the foot exists is lowered when you
turn in the direction of arrow and raised when you
turn it in the opposite direction.
Refrigerator / User manual
Damaged power cable
If the product has a failure,
First unplug the product.
3.5. Illumination lamp
Do not attempt to repair yourself but call the
Authorized Service Agent if the illumination lamps
do not go on or are out of order.
The lamp(s) used in this appliance is not suitable
for household room illumination. The intended
purpose of this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in a safe and
comfortable way.
3.6. Door open warning
(This feature is optional)
An audio warning signal will be given when the
door of your product is left open for 1 minute. This
warning will be muted when the door is closed or
any of the display buttons (if any) are pressed.
3.7. Transportation of the product
1. Unplug the product before transporting it.
2. Clean the interior of the product as recommended
in the "Maintenance and cleaning" section.
3. Secure the shelves, accessories, crisper and
etc. in the product by adhesive tape before
repackaging it.
Packaging must be tied with thick tapes or
C
strong ropes and the rules of transportation
printed on the package must be followed.
C
Original packaging and foam materials
should be kept for future transportations.
Packaging materials are dangerous
A
for the children. Keep packaging materials
in a safe place away
from reach of the children.
9 /34 EN