MEDC SM87XBT Manuel Technique page 3

3.0 OPERATION
3.0 OPERATION
The operating voltage of the unit is stated on the certification label. The beacon can be initiated either directly or
remotely depending on the type ordered. Please see the wiring documentation supplied with the unit for further
The operating voltage of the unit is stated on the certification label. The beacon can be initiated either directly
information.
or remotely depending on the type ordered. Please see the wiring documentation supplied with the unit for
further information.
4.0 MAINTENANCE
4.0 MAINTENANCE
During the working life of the unit, it should require little or no maintenance. However, if abnormal or unusual
During the working life of the unit, it should require little or no maintenance. However, if abnormal or unusual environmental conditions occur due to plant damage or accident etc., then visual inspection is recommended.
environmental conditions occur due to plant damage or accident etc., then visual inspection is recommended.
If the unit requires cleaning, then only clean exterior with a damp cloth to avoid electro-static charge build up.
If the unit requires cleaning, then only clean exterior with a damp cloth to avoid electro-static charge build up.
If a unit fault should occur, then the unit can be repaired by MEDC. All parts of the unit are replaceable.
If a unit fault should occur, then the unit can be repaired by MEDC. All parts of the unit are replaceable.
If you acquired a significant quantity of units, then it is recommended that spares are also made available.
If you acquired a significant quantity of units, then it is recommended that spares are also made available.
Please discuss your requirements with the Technical Sales Engineers at MEDC.
Please discuss your requirements with the Technical Sales Engineers at MEDC.
© Cooper MEDC 2010
GENERAL ARRANGEMENT
GENERAL ARRANGEMENT
11/10