Redfox SPBT 70/80 11 GE Notice D'installation Et D'emploi page 49

Control of the electic oven (STATIC)
You can choose to switch the control knob into select position for top and bottom heaters at the
Control of the electic oven (STATIC)
same time (position 1), or just the bottom heater (position 3) or upper heater (position 2). This is
You can choose to switch the control knob into select position for top and bottom heaters at the
indicated by green LED. Set the control knob into desired temperature. Working heater is indicated
same time (position 1), or just the bottom heater (position 3) or upper heater (position 2). This is
by orange LED, when light goes off, the oven is preheated to the requested temperature. Turn off
indicated by green LED. Set the control knob into desired temperature. Working heater is indicated
the oven by turning both knobs to „0".
by orange LED, when light goes off, the oven is preheated to the requested temperature. Turn off
the oven by turning both knobs to „0".
Control of the convection oven
Turn the control knob to the right, will turn on the fan. This is signalized with a green LED. After
Control of the convection oven
that, set the control knob into desired temperature. Working of the heater is indicated by orange
Turn the control knob to the right, will turn on the fan. This is signalized with a green LED. After
LED, when light goes off, the oven is preheated to the desired temperature. Turn off the oven by
that, set the control knob into desired temperature. Working of the heater is indicated by orange
turning left into the "0".
LED, when light goes off, the oven is preheated to the desired temperature. Turn off the oven by
turning left into the "0".
Přepínač stacionární trouby
Přepínač stacionární trouby
3
3
Regulační knofl ík teploty
stacionární trouby
Regulační knofl ík teploty
stacionární trouby
1
1
2
2
Regulační knofl ík teploty
horkovzdušné trouby
Regulační knofl ík teploty
horkovzdušné trouby
49