Publicité
Les langues disponibles
Les langues disponibles
1 | Reinstall access panels
Insulation
(on some models)
S
ISS
~~
SS
SS S
Access
SK
panel
t
SS
~
Insulation
Grounding
clip
Lower
panel
Check that grounding clip is attached to the lower panel.
Position the lower panel behind the access panel. On some
models there is insulation on the access panel which must
fall behind the insulation on the lower panel.
Reinstall access panels
Hold the two panels together and place them against
dishwasher leg. Using a Phillips or 44" screwdriver, reinstall
the screws through the holes in the access panel and the
slots in the lower panel.
3 | Check lower panel edge
Check that the lower edge of the lower panel contacts
the floor. Adjust if necessary.
Tighten screws
Tighten access panel screws.
°
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Power supply cord—Plug into
a grounded 3 prong outlet
Plug into a grounded 3 prong outlet. Check
that power supply cord does not touch dishwasher
motor or lower part of dishwasher tub.
21
Publicité
