Rowenta RWAC1900C Mode D'emploi page 8

INSTALLATION
This appliance is a portable air conditioner, which can be moved from room to room.
INSTALLATION
Windows Installation Kit
Note: The window kit is only designed to be installed with sliding windows.
The window kit is not designed or to be used with casement style windows.
1. Install the unit adaptor and window slider adaptor on both sides of the exhaust hose.
Exhaust hose
Unit adaptor
2. Connect the exhaust hose assembly to the back of the appliance. Slide in the hose until it is locked in place.
Hook
Unit adaptor
3. Adjust the window sliders as per width or height of your window and insert the supplied bolt to fix at the desired position.
There is a hole where the exhaust hose will be inserted. Make sure this hole is not blocked.
Hole
Window slider A
4. Cut the foam seals A and B to the proper lengths and attach them to the window frame.
Foam seal B
(shorter)
Exhaust hose assembly
Window slider adaptor
Hook groove
Lower groove
Bolt
Window slider B
OR
Foam seal A
Make sure the unit adaptor is
inserted into the lower groove
of the air outlet.
Foam seal A
Foam seal B
(shorter)
EN
8