Domo DO714BL Mode D'emploi page 21

USE
1. Make sure that the speed regulation button is at "0".
2. Put the plug in the outlet and position the container on the engine block.
3. Fill the container with the desired ingredients. Make sure that you do not exceed the maximum
amount of 1.5 l.
4. Position the lid with measuring cup on the container. Make sure that the lid has been fastened
properly. The appliance has a built-in safety feature and will not operate if the lid is not mounted
properly. Turn the speed regulator to the desired speed:
Position 1: for light liquids
Position 2: for thicker fluids and solid foods
5. For quick and accurate blending, turn the speed knob to the pulse function (to the left of 0) and hold
for a few seconds. When you release the knob, it will automatically reset itself to the 0 position. You
can do this a few times in a row, until the desired
6. If you want to add ingredients while you are blending, remove the measuring cup from the lid and
put the extra ingredients into the jar through this fill opening.
7. Turn off the blender by setting the speed knob to 0.
8. Unplug the blender after use.
Caution:
· For each use, the consecutive operation time should not exceed 3 minutes. Between two continuous
cycles at least 10 minutes resting time should be maintained. The appliance needs to cool down to
room temperature before starting the next blending cycle.
· Never use boiling liquids (maximum 60°C) or do not use the blender when the jar is empty.
· For crushing ice, we recommend using no more than 6 ice cubes at one time. While blending, the ice
cubes can be added through the opening in the lid.
CLEANING AND MAINTENANCE
1. Pour some warm soapy water into the jar and turn the speed knob for a few seconds to the pulse
function. Empty the jar.
2. Unplug the blender before continuing with cleaning.
3. Always clean the blender immediately after us for easy cleaning. Do not let food dry in the jar or the
blade assembly, this will make them harder to clean.
4. Disassemble the removable parts. Remove the lid from the container and the measuring cup from
the lid. Place the container upside down and unscrew the blades counter-clockwise.
5. Clean the measuring cup, the lid and the jar by hand.
6. Clean the blades with some warm soapy water and rinse under the tap. Do not touch the blades and
be extra careful. Do not immerse the blade assembly in water. Let the blade assembly dry upside
down, out of reach of children.
7. Wipe the motor unit clean with a damp cloth and dry thoroughly.
Caution:
· Never immerse the motor unit in any liquid to avoid the risk of electrical shock.
· Do not use any rough scouring pads or cleaners on the parts or on the finish of the appliance.
www.domo-elektro.be
consistency has been reached.
21
DO714BL