Toshiba Carrier RBC-AMS54E-UL Manuel Du Propriétaire page 45

 Group control
The following functions can be set individually for each unit when the group control is used:
"Wind direction", "Individual louver", "Swing type", "Louver lock"
Operate the remote control according to the procedure below before setting each function.
Wind direction
– 1 – 1 – – 1 –
– 1 – 2 – 1 –
1 – 3
–
Return
Unit
Wind direction
1 4
– 1 – 1 – – –
1 – 5
– 1 – 2 –
– 1 – 3
Return
Unit Set
1–1 Wind direction
Return
Swing ON
 When central control is performed
When an operation button that is a target of the operation lock is pushed while the operation lock is activated by
central control, the following indication is displayed for 5 seconds.
Mode Fan Speed
4
5
ALL
Set
ALL
Louver
12:00
1
Select the group-controlled function on the
menu screen, then push the "
Set" [ F2] button.
2
Push the "
select the unit to set.
The selected unit changes as follows each time
the button is pushed:
1-1
3
Push the "
The setting display for the selected unit
appears.
4
Push the [
Pushing the [
the previous screen.
Pushing the [
"Swing type" or "Louver lock" shows " Setting"
on the screen.
• The number (address) of the selected unit appears
on the upper left of the screen, unless "All" is
selected for the unit selection.
• "All" is not available for some settings.
Details of operation lock activated by central control
• The start and stop operations are prohibited.
• Changing the operation mode is prohibited.
• Changing the temperature set point is prohibited.
• Changing the fan speed is prohibited.
– 44 –
Owner's Manual
Set
unit" [ F1] button to
Unit
1-2 ALL
Set" [ F2] button.
Set
CANCEL] button.
CANCEL] button returns to
CANCEL] button when setting
EN