Toshiba Carrier RBC-AMS54E-UL Manuel Du Propriétaire page 42

13.Occupancy sensor
 Occupancy sensor setting
• An "Occupancy sensor" can detect whether people are present or not present.
If people are not present, the air conditioner automatically operates in an energy saving mode.
Occupancy sensor setting
1.Occupancy sensor operation
Invalid /
2.Operation during absence
Standby /
Return
Item
Occupancy sensor operation
Operation during absence
NOTE
If an occupancy sensor has not been connected, "
Enable
Stopped
Fix
You can decide whether to disable the occupancy sensor or select the time required
to determine that people are not present.
Factory default setting is 60 minutes for determining time. You can select Disable,
30 minutes, 60 minutes, 90 minutes, 120 minutes, or 150 minutes.
You can select the operation of the air conditioner when people are not present.
Standby: Circulation mode (thermostat OFF)
Stopped: Stops the air conditioner
1
Push the [
menu screen.
2
Push the [
"Occupancy sensor setting" on the menu
screen, then push the "
[ F2] button.
Function
No function" is displayed.
– 41 –
Owner's Manual
MENU] button to display the
∧ ∨
] / [ ] button to select
Set"
Set