Publicité
Les langues disponibles
Les langues disponibles
Installation
• Do not install the remote control unit where there are high levels of moisture, oils, grease or vibration.
Failure to heed this caution may cause trouble.
• Do not install the remote control unit direct sunlight or near a heat source.
Failure to heed this caution may cause malfunctioning.
• Do not install the remote control unit where there are sources of electro-magnetic noise.
Failure to heed this caution may cause unintended operation.
Operation
• Do not drop the product or subject it to strong impact.
Failure to heed this caution may cause malfunctioning.
2
Before Use
Operate the remote control according to the following procedure when it is used for the first time or when the
settings are changed. Pushing the [
made on the remote control from the next time.
Preparation
Turn on the circuit breaker.
• " Setting" appears on the display of the remote control when the power is turned on.
* When the power is turned on, it takes about 5 minutes before the remote control becomes operable. This is not a
malfunction.
• For initial settings, refer to "10. Initial setting" on page 34.
NOTE
• Do not turn off the circuit breaker during the season using the air conditioning unit.
• Turn on the circuit breaker 12 hours or more before starting running the air conditioning unit when the unit has not
been used for an extended period of time.
CAUTION
ON/OFF] button starts running the air conditioning unit with the settings
– 3 –
Owner's Manual
Publicité
