3. Louver setting
Swing type
* Select the louver swing type from the standard swing, dual swing or cyclic swing.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the
setting operation.)
Before setting
Louver setting
1.Swing type
2.Louver lock
Return
Swing type
Standard
Dual
Cycle
Return
Fix
NOTE
• "No function" appears on the display for the models not equipped with the Swing type setting.
• Push the [
CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to
"Louver setting".
• Refer to "14. Information Group control". (page 44)
Set
– 17 –
1
∧
Push the [
] / [
"3.Louver setting" on the menu screen, then
push the "
Set
2
∧
Push the [
] / [
"1.Swing type", then push the "
Set" [
F2] button.
3
∧
Push the [
"Swing type" screen to select the swing
type.
Refer to the Owner's Manual supplied with the
indoor unit about the swing type.
4
Push the [
MENU] button.
"
Setting" appears on the display.
The unit selection screen appears when the
group control is used. Push the [
button on the unit selection screen to finish the
setting operation. "
display.
Owner's Manual
∨
] button to select
Set" [
F2] button.
∨
] button to select
Set
∨
] / [
] button on the
CANCEL]
Setting" appears on the