Gurari GCH E 217 Prime Serie Manuel D'installation Et D'utilisation page 8

Usage
Lighting Power levels
The control takes place via a 3-stage sensor control on the front panel of the extractor hood.
1, 2 and 3 turn on the engine at the appropriate power level. Touch again the lighted power level
switches the motor off again.
The field on the far left switches the LED lighting on and off again.
Alternatively, the cooker hood can also be controlled via the included remote control.
Timer / off timer
The extractor hood has a switchable automatic off timer (5 min). To activate this, keep the desired
power level pressed for 5 seconds. After that the timer activates automatically and turns off the
engine and lights after 5 minutes.
Cleaning and care
- De-energize the device to clean it.
- Clean the outer parts with mild soapy water. Avoid hot cleaners, brushes, or scrubbing cloths.
- Conventional glass cleaner can be used for the glass surfaces.
It is important to follow the filter changes and cleaning intervals. Failure to comply
can be a fire hazard as a result of fat deposits.
Disposal of the transport packaging
The packaging protects the device against damage during transport. The packaging materials are
selected to be environmentally friendly and recyclable.The return of the packaging into the material
cycle saves raw materials and reduces waste. Your seller will take back the packaging.
Packing parts (e.g., foils, styrofoam) can be dangerous to children. There is danger of suffocation!
Keep packaging parts out of reach of children and dispose them as soon as possible.
Disposal of the old device
Electrical and electronic devices often contain valuable materials. They also contain
harmful substances that are essential to their function and safety were necessary.
Disposal as residual waste can harmful to human health and the environment in case
of wrong treatment. Therefore do not put your old device to residual waste. Instead,
use those collection and return points established by your community or municipality
for return and recovery of electrical and electronic waste.