Cleaning the shaver
Insert the appliance
plug.
Plug in the adaptor.
• Remove any soap or water
on the shaver if it has been
washed with hand soap or
any other detergent.
Course
On recharger
clean
Charge
Clean/Dry/Charge
Clean/Dry
Dry/Charge
Dry
*The lamp goes out in 6 seconds.
8
Pull up the arm.
Remove the protective
cap and then attach
the shaver.
• Turn the shaver off before
attaching.
• Check that the outer foil is not
deformed or damaged when you
are attaching the shaver.
Push down the arm.
Course selection indications
Changeable course
halfway through
dry
charge
*
Press [select] to select the course.
• Each time you press [select], the course changes from "Clean/
Dry/Charge" "Clean/Dry" "Dry/Charge" "Dry" "Charge".
• The courses start approximately 6 seconds after they are
selected.
• The course will be aborted if the power is cut off or the
detergent cartridge is detached during cleaning. In this case,
perform the course again from the beginning.
• Do not detach the detergent cartridge or the water tank as the
cleaning liquid may spill causing a malfunction.
Course completion summary
On recharger
clean
dry
charge
On shaver
Time required
(guide)
charge
1 hour
4 h 30 min
3 hours
4 h 20 min
2 h 50 min