Atag VA8215SLR Notice D'utilisation page 214

Troubleshooting
Problem
The dishes are not dry enough.
46
Possible causes
The Automatic door opening
option is not activated.
The dishwasher is not fully
loaded.
Rinse aid needs topping up or
dosage is set too low.
The setting TAB is activated and
all-in-one detergent with
insufficient drying effect is being
used.
Action
Activate the Automatic door
opening option.
Fully load the dishwasher.
Top up with rinse aid or increase
the rinse aid dosage setting.
Switch all-in-one detergents or
deactivate the setting TAB and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.