Atag VA8215SLR Notice D'utilisation page 197

Open the door and press
To open the dishwasher's Settings menu, press or until
and confirm your selection with
To exit the dishwasher's Settings menu, select Exit and confirm your selection with
Select setting
Settings
1. Language
2. Network
WiFi status
WiFi connection
Connection setup
Add device
Remove all devices
WiFi factory reset
Exit
.
.
Alternatives
You can choose the language used for the display.
The current WiFi status is shown on the display.
Connect the dishwasher to your wireless network to be able to remote
control the dishwasher using the ATAG Connect Life app.
See Preparations in the chapter WiFi connection.
On/Off
After connecting the dishwasher to your local network, you can select
WiFi connection Off to deactivate the connection. Select WiFi connection
On to reconnect to the same network.
Connect the dishwasher to your wireless network and pair with your
smartphone/tablet.
Open the ATAG Connect Life app and register an account.
Go to Appliances. Click on Add appliances or the + button. Select
Home appliances.
Scan the dishwasher's QR code (see the serial number plate). Follow
the further instructions in the app.
Select Connection setup.
Pair more devices/users with the dishwasher.
Open the ATAG Connect Life app and register an account.
Go to Appliances. Click on Add appliances or the + button. Select
Home appliances.
Scan the dishwasher's QR code (see the serial number plate). Follow
the further instructions in the app.
Select Add device.
Select Remove all devices to remove all connected devices/users.
Select WiFi factory reset to restore the default factory settings.
Select Exit to exit the menu for Network, press
Settings menu is shown on the display
Confirm setting
.
Settings
.
29