Installation On The Radiator - eQ-3 K Mode D'emploi

The installation of the programmable radiator control unit is
easy and can be performed without discharging the heating
water or interfering with the heating system. Special tools or
switching off the heating are not required. The union nut
fitted to the programmable radiator control unit can be used
universally and without accessories for all valves with a th-
read dimension of M30 x 1.5 mm from the most common
suppliers, such as for example
• Heimeier
• MNG
• Junkers
• Landis&Gyr (Duodyr)
• Honeywell-Braukmann
• Oventrop
• Schlösser
• Comap
• Valf Sanayii
• Mertik Maxitrol
• Watts
• Wingenroth (Wiroflex)
• R.B.M
• Tiemme
• Jaga
• Siemens
• Idmar
By means of the adapters in the delivery, the device can be
installed on radiator valves of type Danfoss RA, Danfoss
RAV and Danfoss RAVL.

6. Installation on the radiator

33