HQ Power HQPE11001 Mode D'emploi page 4

3. General Guidelines

Refer to the Velleman
manual.

All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.

Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.

Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
5. Operation
5.1 Control Panel
on-off
sensitivity
speed
5.2 Installation and Use
1. Install the appliance on a stable and non-slippery surface.
2. You can interchange the modules to your liking. To do so, carefully slide the
modules from the main unit and re-assemble as desired.
3. Locate the power supply input at the back of the appliance. Connect the appliance
to the mains using the power supply.
4. Switch on the appliance and adjust the sensitivity and effect speed.
5. Switch off and disconnect from the mains after use.
V. 01 – 26/10/2018
®
Service and Quality Warranty on the last pages of this
on-off button
sensitivity dial
microphone
switch the appliance on/off
adjust the sensitivity by turning this dial
adjust the effect speed by turning this dial
HQPE11001
4
5
6
4
speed dial
connection wires
power supply input
©Velleman nv