Landmann 12946 Instructions De Montage page 6

6
Part list
Item Qty. Part name
1 1 Side frame, left
2 1 Side frame, right
3 1 Cart base
4 1 Rear panel
5 1 Front panel strut, top
6 1 Grease catchment tray, right
7 1 Grease catchment tray, left
8 4 Rollers
9 1 Front panel strut, bottom
10 1 Barbecue unit, pre-assembled
11 1 Side table
12 1 Side table panel
13 1 Side burner table
14 1 Side burner table panel
15 1 Side burner regulator ring
16 1 Side burner cooking grill
17 1 Lid handle
18 1 Lower cupboard door, left
19 2 Door handle
20 4 Adjusting knob
21 3 Flame tamer
22 2 Cooking Grill 1
23 1 Lower cupboard door, right
24 1 Warming rack
25 1 Grease tray
26 1 Fat catcher tray
27 1 Cooking Grill 2
28 1 Grease cup holder
29 1 Grease cup
1 Screw set with assembly material
Guarantee claims and warranty
Your LANDMANN barbecue left the factory
in a technically flawless condition.
For this reason, in addition to your statutory warranty claims
LANDMANN also offers an extended quality and durability
warranty against rusting through on the following parts:
Burner
Cooking grill/plate
Any warranty and guarantee claims shall become void in the
event of improper use of the barbecue or the use of non-approved
fuels. Discolouration, rusting or slight deformation of parts
exposed directly to the flames (cooking grill, hotplate, burner,
flame tamer, etc.) do not impair the function of the barbecue
and, as such, do not form a basis for any warranty claims.
Please retain your receipt in case you need to make a warranty claim.
Placement of the gas cylinder during use
The gas cylinder can be stored in the base cabinet during use, provided
that it does not exceed the specified maximum dimensions (see page
3). Place the gas cylinder in the recess provided for this purpose in
the base.
Larger gas cylinders can also be set up outside of the barbecue as long
as they do not exceed the maximum height of 700 mm.
EC – Declaration of Conformity
We, LANDMANN GmbH & Co. Handels-KG, hereby declare that the
gas appliance described here complies with EU regulation 2016/426.
Conformity has been verified by a type examination according to EN
498:2012 and EN 484:2019.
The type examination was carried out by the notified body DBI (2531).
Product identification number: 2531CU-0061
Please contact our service department for further information.
5 years
10 years