Publicité
Installation
Take out the Warmer from the packaging and locate the unit on a firm level surface.
When this unit is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative finished,
etc., it is recommended that they be made of non-combustible material, if not, they shall be clad with a suitable
non-combustible heat-insulating material, and that the closet attention be paid to fire prevention regulations.
Once the Warmer has been placed in position by consulting International Standards and regulations. The
Warmer is ready to operate.
Operation
Plug the power cord into the power supply, Switch on the unit, Turn the temperature dial clockwise to the
desired setting, when not in use, just simply turn off the thermostat and unplug the power.
Maintenance
•
Clean using warm soapy water after each use.
•
Do not immerse completely in water to clean.
•
The unit is not to be cleaned with a water jet.
HELP
If the Warmer does not work, please check the following:
1. The power supply is correct.
2. The element is not damaged.
REFERENCE
Item Number
Model Number
44181
FW-CN-0251
44182
FW-CN-0252
44183
FW-CN-0253
Description
Sauce Pot Warmer 2.5L x
1-Pot Thermostat Control 110V/60/1 QPS
Sauce Pot Warmer 2.5L x
2-Pot Thermostat Control 110V/60/1 QPS
Sauce Pot Warmer 2.5L x
3-Pot Thermostat Control 110V/60/1 QPS
6
Manufacturer Model
Number
PA30730-1
PA30730-2
PA30730-3
Publicité
