Publicité
Les langues disponibles
Les langues disponibles
FEATURES
1. Selection of stitch pattern
Rotate the pattern selection dial to select one pattern you want from the 12 stitch patterns. There are pattern
illustrations on the surface of machine body for your reference.
Caution:
Before you change the stitch pattern, please turn off the switch and turn the hand wheel to raise the
needle all the way up so it doesn't get stuck and bent.
Changing the stitch pattern is not allowed when the machine is running, otherwise the needle and/or
machine may damage.
2. Reverse sewing
Reverse sewing (back stitching) is useful for reinforcing the beginning and end of seams. To use this function
proceed as follows:
1) Sew forwards as normal, and then press and hold down the reverse stitch button on the front of the
sewing machine to sew backwards.
2) To sew forwards again simply release the reverse stitch button.
Note: Reverse sewing is applicable only to stitch patterns 1 to 4.
3. Setting the sewing speed
Slide the power switch to "L" or "H" position. ("L" = low speed; "H" = High speed)
4. Working lamp
If additional light is needed, press the light switch to turn the light on. Press the switch again to turn it off. The
working lamp cannot be replaced yourself.
5. Thread cutter
The machine has a thread cutter on the central left side of the machine, it can cut off the thread after sewing
or winding thread.
6. Sewing sleeves
This sewing machine has been designed to sew sleeves or any narrow openings in garment. Lift the presser
foot. Position the garment over the sewing arm. Lower the presser foot and follow the regular sewing
instructions.
7. Manual buttonhole
1) Pull the cloth under the presser foot and lower the presser foot on the cloth where you need to sew
- 9 -
Publicité
