Leckey sleepform 1 Mode D'emploi page 7

How to mould the Sleepform Mattress
It is worth taking a little time to practice
moulding the Sleepform Mattress before
setting it up for your child.
Set the bag on a table or bed.
Attach the pump to the nozzle and open the
valve. Using the hand pump extract some air
out. The slower you pull the handle the quieter
it will be. As you extract air you will feel that the
mattress begins to become less flexible.
Evacuate some more air - see how the
mattress begins to retain its shape as you
remove the air. Eventually the mattress will
become firm. To retain it's shape close the
valve and remove the pump.
Our experience shows us the mattress is
easier to mould if you have evacuated some
air first. This will compress the beads slightly
and allow them to retain some form while you
are moulding it around your child.