Chord Database; Metronome; Switching Metronome On/Off; Selecting Beat Type - MC Crypt MC-37A Mode D'emploi

18. Chord Database

The internal database for chords displays the notes and keys for the
respective chord in the display.
• Press the button "LESSON/CHORD DICT" (18); the display shows "DICT".
• The clavier keys above "#G3" (see label below the clavier on the keyboard
casing) serve to determine the chord type, the keys above "C5" to determine
the base chord.
After chord type and base chord are entered, the display shows the keys
to be pressed at the same time for this chord.
• Now press the key combination displayed to play the chord.
If you have pressed the right keys, an applause sound is also output.

19. Metronome

a) Switching Metronome On/Off
• Press the button "METRO" (22) to switch on the metronome; the
corresponding metronome sound is output.
• The metronome speed can be adjusted with the two "TEMPO" buttons
(9).
• Pressing "METRO" (22) again switches off the metronome again.
b) Selecting Beat Type
• Press "FUNCTION" repeatedly until the display shows "BET 4".
• With the buttons "+" or "-", you can select the desired beat type (basic
setting is "4").
42