Vibrato Effect, Button "Modulation; Dsp Effect, Button "Dsp; Transpose Function; Selecting Piano Instrument, Button "Piano - MC Crypt MC-37A Mode D'emploi

c) Vibrato Effect, Button "MODULATION"
Press the "MODULATION" button (17) to switch the Vibrato effect on or off.
If the effect is switched on, the top centre of the display shows "U1 ON". If
the effect is switched off, the display shows "U1 OFF".
Play a note on the clavier and switch the effect on or off to hear the different
sound.
d) DSP Effect, Button "DSP"
Press the "DSP" button (20) to switch the DSP effect on or off. When the
DEP effect is switched on, every instrument will sound fuller.
If the effect is switched on, the left of the display shows a small symbol for
"DSP".
DSP
Play a note on the clavier and switch the effect on or off to hear the different
sound.
e) Transpose Function
With the transpose function, you can change playback in half-tone steps
when playing the clavier, similar to tuning a real instrument.
Press "FUNCTION" (12) until the display shows "TPS 0".
Use the buttons "+" or "-" (19) to adjust playback in 12 half-tone steps
(-6.....+6).
With the keyboard in setting mode ("TPS...." is displayed), you can reset the
setting to "0" by pressing the two buttons "+" and "-" at the same time.
f) Selecting Piano Instrument, Button "PIANO"
Pressing the button "PIANO" (23) directly activates the piano instrument
with the correct pre-settings independently of any other settings.
Pressing "PIANO" again returns to the previous settings.
38